MAX4784EUE+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4784 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3V |
| Number of Channels | 2 |
| Number of Circuits | 4 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| -3db Bandwidth | 123MHz |
| On-State Resistance (Max) | 1Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 33pF 60pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 25ns, 10ns |
| Charge Injection | 5pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -95dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 30ns |
| Switch-off Time-Max | 15ns |
| Voltage - Supply, Single (V+) | 1.6V~4.2V |
| Signal Current-Max | 0.15A |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
MAX4784EUE+ Overview
As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tube. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Operation at a temperature around -40°C~85°C TA. In total, 16 terminations have occurred. A 2 channel electronic part produces high-quality output. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. Electronic part bodies are injected with 16 pins. Multiplexers built on a SPDT switching circuit are built. It consists of 4 circuits. Try searching with MAX4784 to find analog multiplexer variants. For functions related to 16 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. A voltage of 1.6V~4.2V is required to drain this analog switch from a single voltage supply. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER.
MAX4784EUE+ Features
2 Channels
Switch Circuit: SPDT
-3db Bandwidth: 123MHz
MAX4784EUE+ Applications
There are a lot of Maxim Integrated MAX4784EUE+ Analog Switches & Multiplexers ICs applications.
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- DSUs
- Data Acquisition Systems
- DSLAMs
- Data switching
- Audio signal routing
- Voice over IP/DSL – Integrated Access Devices, Smart
- Signal routing between systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Access Concentrators