MAX4784ETE+T
| Parameters | |
|---|---|
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -95dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.6V~4.2V |
| Signal Current-Max | 0.15A |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 1.1765W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4784 |
| Pin Count | 16 |
| JESD-30 Code | S-XQCC-N16 |
| Operating Supply Voltage | 3V |
| Number of Channels | 2 |
| Number of Circuits | 4 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 2μA |
| Turn On Delay Time | 30 ns |
| Logic Function | Multiplexer |
| Supply Type | Single |
| Bandwidth | 123MHz |
| Supply Current-Max (Isup) | 0.002mA |
| Turn-Off Delay Time | 15 ns |
| On-State Resistance (Max) | 1Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 33pF 60pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 25ns, 10ns |
| Charge Injection | 5pC |
MAX4784ETE+T Overview
The electrical component comes in 16-WFQFN Exposed Pad packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operation at a temperature around -40°C~85°C TA. In total, there have been 16 terminations. A high-quality output is provided by the electrical component's 2 channels. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Unlike digital switches, these are based on SPDT switching circuits. Circuits number 4 make up this analogue multiplexer. Look for analog switch ic variants by searching with MAX4784. Internally, this switch multiplexer has a resistance of 1Ohm. Multiplexers should not be powered above 3.6V in normal situations. A cost-effective Single supply type analogue multiplexer. It is recommended to use 1.6V as the lowest voltage for the electrical part. In order to operate this switch device, it would need a current of 2μA. A voltage of 1.6V~4.2V is required for this switch device, which drains from a single voltage source. 3V operating voltages are supported by the electronic component. A 123MHz-bandwidth can be used for data transfer.
MAX4784ETE+T Features
2 Channels
Switch Circuit: SPDT
2μA Supply Current
Bandwidth: 123MHz
MAX4784ETE+T Applications
There are a lot of Maxim Integrated MAX4784ETE+T Analog Switches & Multiplexers ICs applications.
- High-Voltage
- Avionics test equipment
- Wireless Local Loop
- Battery Powered Systems
- Intelligent PBX
- Communication systems
- Automatic test equipment
- Audio and video switching
- Digital access cross connects
- Sample-and-hold systems