MAX4754AETE+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Supplier Device Package | 16-TQFN (4x4) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 850mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 1.349W |
| Base Part Number | MAX4754 |
| Number of Circuits | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 6.5μA |
| Nominal Supply Current | 12μA |
| Throw Configuration | SPDT |
| Turn On Delay Time | 50 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 140 ns |
| -3db Bandwidth | 10MHz |
| On-State Resistance (Max) | 850mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 4nA |
| Channel Capacitance (CS(off), CD(off)) | 180pF 300pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 140ns, 50ns |
| Charge Injection | 300pC |
| Channel-to-Channel Matching (ΔRon) | 100mOhm |
| Crosstalk | -90dB @ 100kHz |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4754AETE+T Overview
As the electronic part is packed in 16-WQFN Exposed Pad, international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. It is mounted in the position Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around -40°C~85°C TA. A SPDT switching circuit is used for these analog switches. A total of 4 circuits make up this switch device. Try searching for the analog switch ic with MAX4754 if you are looking for variants. A 850mOhm internal resistance characterizes this multiplexer. For details about the functions of 16 pins, please refer to the datasheets. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. The digital multiplexer has a low cost Single supply. It is recommended that the electrical component receives a voltage of 1.8V. This multiplexer would work with 6.5μA current. The voltage required by this switch device is 1.8V~5.5V, draining from a single voltage supply. During operation, the multiplexer should not be exposed to a temperature above 85°C. It is possible to purchase a 16-TQFN (4x4) package from suppliers.
MAX4754AETE+T Features
Switch Circuit: SPDT
6.5μA Supply Current
-3db Bandwidth: 10MHz
MAX4754AETE+T Applications
There are a lot of Maxim Integrated MAX4754AETE+T Analog Switches & Multiplexers ICs applications.
- Cable PC
- Industrial control systems
- Sample-and-hold systems
- DVD-R
- Microprocessor controlled systems
- Routers
- Cross Connects
- Microwave transmission systems
- High speed data transmission line cards
- Public switching systems