MAX4754AEBE+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFBGA, CSPBGA |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 850mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 1.349W |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX4754 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 6.5μA |
| Nominal Supply Current | 12μA |
| Turn On Delay Time | 50 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 140 ns |
| -3db Bandwidth | 10MHz |
| On-State Resistance (Max) | 850mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 4nA |
| Channel Capacitance (CS(off), CD(off)) | 180pF 300pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 140ns, 50ns |
| Charge Injection | 300pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height Seated (Max) | 0.67mm |
| Length | 2.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4754AEBE+T Overview
Due to its 16-WFBGA, CSPBGA packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -40°C~85°C TA. The total number of terminations is 16. A electrical component with 1 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. The electronic part body is injected with 16 pins. These analog multiplexers are built based on SPDT switching circuits. There are 4 circuits in this switch device. MAX4754 can be used to search for analog multiplexer variants. An switch multiplexer with 850mOhm internal resistance has a value of 850mOhm. Datasheets for 16 pin functions are available upon request. Theswitch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. Analog switch ics with Single supply type are cost-effective. 1.8V should be the lowest voltage fed to the electronic component. The switch device would be able to operate with 6.5μA current. Draining from a single voltage supply, this analog switch requires a voltage of 1.8V~5.5V. The digital multiplexer has SEPARATE OUTPUT outputs that can be used.
MAX4754AEBE+T Features
1 Channels
Switch Circuit: SPDT
6.5μA Supply Current
-3db Bandwidth: 10MHz
MAX4754AEBE+T Applications
There are a lot of Maxim Integrated MAX4754AEBE+T Analog Switches & Multiplexers ICs applications.
- Cable PC
- Residential Gateways, Home Gateway/Router
- T1/E1 Terminals
- ISDN NT1/TA
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Avionics
- Isolation
- Channelized and Unchannelized DS3 applications
- Digital Cross-Connects
- Remote wireless modules