MAX4661EAE+T
| Parameters | |
|---|---|
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 2.5Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 56 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 55pF 55pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 275ns, 175ns |
| Charge Injection | 300pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -59dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 275ns |
| Switch-off Time-Max | 175ns |
| Normal Position | NO |
| Height Seated (Max) | 1.99mm |
| Length | 6.2mm |
| Width | 5.29mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4661 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Power Supplies | 12/+-15V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±4.5V~20V |
MAX4661EAE+T Overview
Shipping overseas is convenient with the electronic component packed in 16-SSOP (0.209, 5.30mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. The multiplexer is located in Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. The total number of terminations is 16. High-quality output is provided by the electronic component's 1 channels. A 15V voltage supply should turn on and run the electronic component. 16 pins are injected to the electronic part body. Based on SPST - NC switching circuits, these analog multiplexers work. This multiplexer is composed of 4 circuits. Try searching for MAX4661 variants of the analog switch ic. The analog multiplexer shown here is a typical Multiplexer or Switches. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.
MAX4661EAE+T Features
1 Channels
Switch Circuit: SPST - NC
MAX4661EAE+T Applications
There are a lot of Maxim Integrated MAX4661EAE+T Analog Switches & Multiplexers ICs applications.
- Voice over IP/DSL – Integrated Access Devices, Smart
- CSU
- Multi-Line E1 Interface Cards
- Medical Instrumentation
- 65 V DACs
- Microwave transmission systems
- Imaging
- High speed data transmission line cards
- Digital access cross connects
- Audio and video routing