MAX4644EUT+T
| Parameters | |
|---|---|
| Length | 2.9mm |
| Width | 1.63mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Weight | 36.003894mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 4Ohm |
| Additional Feature | CAN ALSO OPERATE WITH 5V SUPPLY |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | MAX4644 |
| Pin Count | 6 |
| Number of Channels | 1 |
| Voltage | 5V |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 1μA |
| Max Supply Current | 1μA |
| Number of Bits | 2 |
| Turn On Delay Time | 15 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 5 ns |
| On-State Resistance (Max) | 4Ohm |
| High Level Output Current | 50mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 55 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 12pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 15ns, 5ns |
| Charge Injection | 5pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -82dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height | 1.1mm |
MAX4644EUT+T Overview
As the electronic part is packed in SOT-23-6, international shipping is convenient. The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Operation at a temperature around -40°C~85°C TA. Total terminations are 6. A 1 channel electronic part produces high-quality output. If the voltage supply is 3V volts, the electrical component should be turned on and run. Into the electrical component body are injected 6 pins. SPDT switching circuits are used in these analog switch ics. 1 circuits are used in this analogue multiplexer. Use MAX4644 to search for variants of the digital switches. An switch multiplexer with 4Ohm internal resistance has a value of 4Ohm. For details about the functions of 6 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. Digital switch that provides Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 1.8V. For this digital switch to work, 1μA current would suffice. A voltage of 1.8V~5.5V is required to drain this analog switch from a single voltage supply. Putting voltage greater than 1μA on the multiplexer may cause damage. Additional features include: CAN ALSO OPERATE WITH 5V SUPPLY. 2-bits are supported.
MAX4644EUT+T Features
1 Channels
Switch Circuit: SPDT
1μA Supply Current
Additional Features: CAN ALSO OPERATE WITH 5V SUPPLY
2-Bit
MAX4644EUT+T Applications
There are a lot of Maxim Integrated MAX4644EUT+T Analog Switches & Multiplexers ICs applications.
- Transmit
- Medical Instrumentation
- Multiplexers
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Audio and video routing
- Wireless Local Loop
- Automatic test equipment
- Battery Powered Systems
- Cable Modem
- Fiber to the Home