MAX4624EUT+T
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | IT CAN ALSO OPERATE WITH 3 V SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4624 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Number of Bits | 2 |
| On-State Resistance (Max) | 1Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 57 dB |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 32pF |
| On-state Resistance Match-Nom | 0.06Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 50ns, 50ns |
| Charge Injection | 65pC |
| Channel-to-Channel Matching (ΔRon) | 60m Ω |
| Crosstalk | -57dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 50ns |
| Switch-off Time-Max | 50ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
MAX4624EUT+T Overview
Presented in SOT-23-6, this electrical component is convenient for overseas shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 2:1. Operating temperature around -40°C~85°C TA extended. A total of 6 terminations have been recorded. As a result of its 1 channels, this electronic component provides high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. As part of the design of the 6 series, this electronic part has been incorporated into the system. On the other hand, analog switches can be constructed using SPDT switching circuits. There are 1 circuits in this multiplexer. Using the MAX4624 search parameter, you can discover variants of the switch. Datasheets for 6 pin functions are available upon request. A analogue multiplexer of this type is a Multiplexer or Switches. A voltage of 1.8V~5.5V is required for this switch device, which drains from a single voltage source. This electrical component also includes additional features such as IT CAN ALSO OPERATE WITH 3 V SUPPLY. The switch device is capable of conducting in a 2-bit mode.
MAX4624EUT+T Features
1 Channels
Switch Circuit: SPDT
Additional Features: IT CAN ALSO OPERATE WITH 3 V SUPPLY
2-Bit
MAX4624EUT+T Applications
There are a lot of Maxim Integrated MAX4624EUT+T Analog Switches & Multiplexers ICs applications.
- SDH
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Cable PC
- PBXs
- Wireless Local Loop
- Medical systems
- Multiplexers
- SONET
- Automotive applications
- Remote wireless modules