MAX4602CWE+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 2.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4602 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 12/+-15V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 2.5Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 56 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 55pF 55pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 250ns, 350ns |
| Charge Injection | 120pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -59dB @ 1MHz |
| Switch-on Time-Max | 250ns |
| Switch-off Time-Max | 350ns |
| Normal Position | NO |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
MAX4602CWE+ Overview
Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.295, 7.50mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. There is 1:1 ratio between the number of multiplexers and demultiplexers. Temperatures around 0°C~70°C TA are extended for operation. In total, there are 16 terminations. This electronic part offers high-quality output due to its 1 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. The electronic part body is injected with 16 pins. A SPST - NO switching circuit is used for these analog switches. There are 4 circuits in this multiplexer. MAX4602 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 2.5Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. Multiplexer or Switches is a typical switch device. A total of SEPARATE OUTPUT outputs are available on this analog switch ic.
MAX4602CWE+ Features
1 Channels
Switch Circuit: SPST - NO
MAX4602CWE+ Applications
There are a lot of Maxim Integrated MAX4602CWE+ Analog Switches & Multiplexers ICs applications.
- Audio/video switches
- Voice over IP/DSL – Integrated Access Devices, Smart
- Residential Gateways, Home Gateway/Router
- Automatic test equipment
- DVD-R
- Medical
- Multi-Line E1 Interface Cards
- Access Concentrators
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- SDH/SONET multiplexers