MAX4524EUB+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4524 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| On-State Resistance (Max) | 150Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 4pF 14pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 150ns, 120ns |
| Charge Injection | 0.8pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 300ns |
| Switch-off Time-Max | 200ns |
| Voltage - Supply, Single (V+) | 2V~12V |
| Signal Current-Max | 0.02A |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX4524EUB+ Overview
Packed in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), the electronic component is convenient for shipping overseas. This high-reliability packaging method uses advanced packaging methods Tube. There is an analog multiplexer mounted in position Surface Mount. 4:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. Total terminations are 10. A electrical component with 4 channels is capable of high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. A total of 10 pins are injected into the body of the electronic part. Multiplexers built on a SP4T switching circuit are built. This multiplexer is composed of 1 circuits. Look for analog switch ic variants by searching with MAX4524. The functions of 10 pins can be found in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. A voltage of 2V~12V is required for this switch device, which drains from a single voltage source. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module.
MAX4524EUB+ Features
4 Channels
Switch Circuit: SP4T
MAX4524EUB+ Applications
There are a lot of Maxim Integrated MAX4524EUB+ Analog Switches & Multiplexers ICs applications.
- Communication systems
- Fiber to the Home
- DSUs
- Medical Instrumentation
- Residential Gateways, Home Gateway/Router
- PCMCIA cards
- Multi-Line E1 Interface Cards
- Battery Powered Systems
- Precision test equipment
- Transmit