MAX388CPN
| Parameters | |
|---|---|
| Height Seated (Max) | 4.572mm |
| Length | 22.86mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| Terminal Finish | TIN LEAD |
| Additional Feature | FAULT PROTECTED; OVERVOLTAGE PROTECTION |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 18 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 3kOhm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| On-state Resistance Match-Nom | 300Ohm |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1μs |
| Charge Injection | 55pC |
| Channel-to-Channel Matching (ΔRon) | 300 Ω |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
MAX388CPN Overview
The electronic part can be shipped overseas conveniently because it is packaged in 18-DIP (0.300, 7.62mm). The advanced packaging method Tube provides high reliability. A switch device like this is mounted in Through Hole. 8:1 is the ratio of multiplexer to demultiplexer circuits. The operating temperature is extended to around 0°C~70°C TA. The total number of terminations is 18. The electronic part delivers high-quality output through its 8 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. As part of the design of the 18 series, this electronic part has been incorporated into the system. The multiplexer consists of 1 circuits. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. This electronic part has additional features, such as: FAULT PROTECTED; OVERVOLTAGE PROTECTION.
MAX388CPN Features
8 Channels
Additional Features: FAULT PROTECTED; OVERVOLTAGE PROTECTION
MAX388CPN Applications
There are a lot of Rochester Electronics, LLC MAX388CPN Analog Switches & Multiplexers ICs applications.
- High-Voltage
- DSLAMs
- Remote wireless modules
- Avionics
- 65 V DACs
- Video switching
- DSUs
- SDH
- Mechanical reed relay replacement
- Medical systems