MAX3490EPA+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX3490 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Nominal Supply Current | 1.9mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 10Mbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 50mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 90 ns |
| Simplex/Duplex | Full Duplex |
| Transmit Delay-Max | 35 ns |
| Output Low Current-Max | 0.0025A |
| High Level Input Current-Max | 0.000002A |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX3490EPA+ Overview
This driver chip is excellent for driving common LEDs due to its enhanced 8-DIP (0.300, 7.62mm) package.The package of this receiver is Tube.As a Transceiver can transceiver, this part has enabled many applications to be served.The wide receiver can be mounted on any Through Hole-type PCB or development board.Power supply requirements for this differential driver are 3V~3.6V.It is possible to have up to 1/1 receivers/drivers in use simultaneously with this electronic part.IC receiver has been designed primarily for applications operating at -40°C~85°C.There is a voltage range of 3.3V for this line driver ic, so it can operate efficiently.Integrated into this wide receiver are 8 terminations that are used for driving and receiving signals from data.In this package, you will find 8 market-standard pinouts for this transceiver.The base part number MAX3490 identifies the product type, temperature, package, etc., so you can search for more variants by using it.This is a 8-pin driver IC with enhanced power dissipation control.Its package size is drastically reduced by downsizing ICs and utilizing high-density Through Hole mounting techniques.Using this ic receiver, you were able to achieve a resolution of 1 bits.This receiver is typically specified with a resolution of 1 bits. There is a 3.3V input voltage supply that can be used to operate this transceiver module.There is a subcategory called Line Driver or Receivers for this rf transceiver module.There are 1 transceivers in total implemented by this IC.
MAX3490EPA+ Features
Tube package
8 pin count
8 pins
MAX3490EPA+ Applications
There are a lot of Maxim Integrated MAX3490EPA+ Drivers/Receivers/Transceivers applications.
- Remote controls
- Pocket PC
- Televisions
- Transmission stations
- Low power, low voltage systems
- Precision engineering measurement
- Ship
- interconnection between switches
- Precision geodetic measurement
- Remote controls