M4A5-32/32-7JC
| Parameters | |
|---|---|
| Height Seated (Max) | 4.572mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-32 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 1250 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 516 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
M4A5-32/32-7JC Overview
There are 32 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).You can find it in package [0].It is equipped with 32I/O ports.44terminations are programmed into the device.This electrical component has a terminal position of 0.Power is supplied by a voltage of 5V volts.The part belongs to Programmable Logic Devices family.Tubeshould be used for packaging the chip.To ensure reliability, the device operates at a temperature of [0].It is mounted in the way of Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4A series.In this chip, the 44pins are programmed.When using this device, YEScan also be found.The M4A5-32contains its related parts.In digital circuits, there are 1250gates, which act as a basic building block.High efficiency requires a voltage supply of [0].It is recommended that data be stored in [0].It is mounted by Surface Mount.A total of 44pins are provided on this board.There is a maximum supply voltage of 5.25V.The device is designed to operate with a minimal supply voltage of 4.75VV.In order for the device to operate, it requires 5V power supplies.There are 516 programmable I/Os in this system.The maximum frequency should not exceed 125MHz.
M4A5-32/32-7JC Features
44-LCC (J-Lead) package
32 I/Os
The operating temperature of 0°C~70°C TA
44 pin count
44 pins
5V power supplies
M4A5-32/32-7JC Applications
There are a lot of Lattice Semiconductor Corporation M4A5-32/32-7JC CPLDs applications.
- Code converters
- Boolean function generators
- Programmable power management
- Storage Cards and Storage Racks
- Preset swapping
- State machine design
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- State machine control
- Bootloaders for FPGAs