LT6202CS8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Operating Supply Voltage | 12V |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 12.6V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 2.8mA |
| Max Supply Current | 3mA |
| Slew Rate | 25 V/μs |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 3.8μA |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 100MHz |
| Gain Bandwidth Product | 90MHz |
| Voltage Gain | 96.9dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Max Dual Supply Voltage | 6.3V |
| Min Dual Supply Voltage | 1.25V |
| Dual Supply Voltage | 5V |
| Nominal Gain Bandwidth Product | 100MHz |
| Number of Amplifiers | 1 |
| Height | 1.48mm |
| Length | 5mm |
| Width | 3.99mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT6202CS8#PBF Overview
Packaged in a SOIC case, the buffer op amp is ready to use. The buffer op amp includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 500μV. Using a supply current of 2.8mA , this buffer op amp will be able to operate. There should be no change in the voltage gain. During the manufacturing process, this buffer amplifier is divided into 1 circuits. Buffer op amp is equipped with 1 channels on the device. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. A temperature greater than 85°C should not be used for the operation of this instrumentation amplifier. For the operating supply voltage of the op amp ic, there is a rating of 1. The operating supply voltage of instrumentation amplifier is rated 12V voltage. I would like to point out that this electrical component is capable of working from a voltage below 12.6V as far as the power supply is concerned. To keep the buffer amps' supply voltage higher than 2.5V. This electronic part should be conducted with a dual supply voltage of 6.3V volts for this part. As you can see, the linear amplifier has 1 amplifiers.
LT6202CS8#PBF Features
96.9dB voltage gain
LT6202CS8#PBF Applications
There are a lot of Analog Devices, Inc. LT6202CS8#PBF Instrumentational OP Amps applications.
- Fast A/D and D/A converters
- Strain gauges
- MP3
- Signal transformation
- Industrial applications including automation
- Video amplifiers
- Voltage regulation circuit
- Commercial audio systems
- Medical imaging
- Television