LT6015MPS5#TRMPBF
| Parameters | |
|---|---|
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6015 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Circuits | 1 |
| Operating Supply Current | 325μA |
| Supply Current-Max | 0.37mA |
| Slew Rate | 0.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 126 dB |
| Current - Input Bias | 2nA |
| Voltage - Supply, Single/Dual (±) | 3V~50V ±1.5V~25V |
| Output Current per Channel | 32mA |
| Input Offset Voltage (Vos) | 55μV |
| Bandwidth | 3.3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 3300 kHz |
| Average Bias Current-Max (IIB) | 0.3μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 30V |
| Voltage - Input Offset | 55μV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Power | NO |
| Length | 2.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -55°C~150°C |
| Packaging | Cut Tape (CT) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
LT6015MPS5#TRMPBF Overview
There is a SOT-23-5 Thin, TSOT-23-5 case in which the instrumentation amplifier is packaged. A General Purpose-type buffer amplifier is shown here. Upon delivery, op amp ic is packaged in a Cut Tape (CT) case. A total of 5 terminations have been reported in the past few weeks. In total, there are 5 pins on this op amp ic. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. In total, the buffer amplifier consists of 5 pins. Op amp ic rates 55μV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, op amp ranges -55°C~150°C. This op amp can operate from a supply current at 325μA. This op amp ic has 1 circuits. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The linear amplifier is packaged by using a TAPE AND REEL axis.
LT6015MPS5#TRMPBF Features
5 Pins
supply voltage of 15V
Output Type: Rail-to-Rail
LT6015MPS5#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LT6015MPS5#TRMPBF Instrumentational OP Amps applications.
- Car stereo
- Semiconductor detectors
- Test and measurement instruments
- Integrator circuits
- Video computer boards
- Subtraction operation circuits
- Image computer boards
- Band-stop filter
- Test equipment
- Vehicle electronics