LT1884CN8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1884 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 5/+-15V |
| Operating Supply Current | 850μA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 108 dB |
| Current - Input Bias | 150pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 50μV |
| Gain Bandwidth Product | 2.2MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 2200 kHz |
| Voltage Gain | 124.08dB |
| Power Supply Rejection Ratio (PSRR) | 108dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 30μV |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.0009μA |
| Nominal Gain Bandwidth Product | 2MHz |
| Height Seated (Max) | 3.937mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1884CN8#PBF Overview
Op amp is packaged in 8-DIP (0.300, 7.62mm) case. Op amps are General Purpose types of amplifier on the chip. A Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. Buffer amplifier has a total of 8 pins on it. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. Instrumentation amplifier is a part of Operational Amplifier. There are 8 pins on this chip. Op amp rates 50μV as input offset voltage. Through Hole is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges 0°C~70°C. Using a supply current of 850μA , this buffer op amp will be able to operate. Voltage gain should remain at 124.08dB. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. There is an operating supply voltage rating of 2 for this operational amplifier, which is rated at the manufacturer.
LT1884CN8#PBF Features
8 Pins
supply voltage of 15V
124.08dB voltage gain
Output Type: Rail-to-Rail
LT1884CN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1884CN8#PBF Instrumentational OP Amps applications.
- Portable docking station
- Logarithmic operation circuits
- Proportional operation circuits
- Test and measurement instruments
- Comparator
- Industrial control system
- High/low-pass filter circuit
- High gain DC amplifier
- Instrumentation
- Micro signal measurement