LT1223CS8#PBF
| Parameters | |
|---|---|
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 100MHz |
| Number of Amplifiers | 1 |
| Height | 1.5mm |
| Length | 5mm |
| Width | 3.99mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 6mA |
| Max Supply Current | 10mA |
| Slew Rate | 1000 V/μs |
| Common Mode Rejection Ratio | 56 dB |
| Current - Input Bias | 1μA |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 100MHz |
| Gain Bandwidth Product | 100MHz |
| Voltage Gain | 89dB |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Max Dual Supply Voltage | 15V |
| -3db Bandwidth | 100MHz |
| Min Dual Supply Voltage | 5V |
LT1223CS8#PBF Overview
In the package, you will find a SOIC-case to contain the op amp ic. 8 pins are located on the operational amplifiers. Op amp rates 1mV as input offset voltage. You can run this op amp ic on 6mA . Keeping the voltage gain at 89dB is the best course of action. On this buffer amplifier, there are 1 circuits. Instrumentation amplifier has 1 channels on it. This op amp needs to be operated at a temperature of not less than 0°C degrees Celsius in order to function properly. Use op amps only at temperatures no higher than 70°C. It is possible to count 1 elements on this buffer amplifier. The electrical part is capable of being powered by a voltage of under 36V, which means that it can be used with any voltage supply. A voltage of 5V or higher is recommended for the linear amplifier's supply voltage. In order for this electronic part to be conducted successfully, you should use a dual supply voltage of 15V. A linear amplifier such as this has 1 amplifiers on it.
LT1223CS8#PBF Features
89dB voltage gain
LT1223CS8#PBF Applications
There are a lot of Analog Devices, Inc. LT1223CS8#PBF Instrumentational OP Amps applications.
- Micro signal measurement
- Fission chambers
- ECG equipment
- Television
- Mobile phone
- Video data acquisition
- Cinema or auditorium audio system
- Scintillation detectors
- Image computer boards
- Differentiator circuits