LC4256C-75TN100I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4256 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2.5mA |
| Number of I/O | 64 |
| Nominal Supply Current | 2.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 16 |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 128 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4256C-75TN100I Overview
There are 256 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).A 100-LQFP package contains the item.The device is programmed with 64 I/Os.100terminations are programmed into the device.There is a QUADterminal position on the electrical part in question.The power source is powered by 1.8Vvolts.It belongs to the family [0].As a result, it is packaged as Tray.Due to its reliability, it is operated at a temperature of [0].There should be a Surface Mounton the chip.In terms of FPGAs, it belongs to the ispMACH? 4000C series.It has 100pins programmed.If this device is used, you will also be able to find [0].LC4256contains its related parts.If high efficiency is desired, the supply voltage should be kept at [0].Data is stored using [0].Surface Mountmounts this electronic component.The device is designed with pins [0].There is a maximum supply voltage of 1.95Vwhen the device is operating.Initially, it requires a voltage of 1.65Vas the minimum supply voltage.There are 128 Programmable I/Os.The maximal frequency should be lower than 322MHz.The status of input signals is determined by 10dedicated inputs.The fundamental building block consists of 16logic elements/cells.
LC4256C-75TN100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins
LC4256C-75TN100I Applications
There are a lot of Lattice Semiconductor Corporation LC4256C-75TN100I CPLDs applications.
- Software Configuration of Add-In Boards
- White goods (Washing, Cold, Aircon ,...)
- Synchronous or asynchronous mode
- Timing control
- DDC INTERFACE
- Custom state machines
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Power automation
- Random logic replacement
- Page register