LC4032ZC-75TN48E
| Parameters | |
|---|---|
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 2 |
| Number of Gates | 800 |
| Number of Programmable I/O | 208 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~130°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4032 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 50μA |
| Number of I/O | 32 |
| Nominal Supply Current | 50μA |
| Memory Type | EEPROM |
LC4032ZC-75TN48E Overview
There are 32 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is contained in package [0].It is programmed with 32 I/Os.There are 48 terminations programmed into the device.Its terminal position is QUAD.Power is supplied by a voltage of 1.8V volts.This part is part of the family [0].The chip should be packaged by Tray.During operation, the operating temperature is kept at -40°C~130°C TJ to ensure its reliability.It is recommended to mount the chip by Surface Mount.The ispMACH? 4000Zseries comprises this type of FPGA.There are 48pins on the chip.This device is also capable of displaying [0].According to the LC4032, its related parts can be found.In digital circuits, there are 800gates, which act as a basic building block.High efficiency requires the supply voltage to be maintained at [0].It is recommended that data be stored in [0].Surface Mountis the mounting point of this electronic part.This board has 48 pins.There is a maximum supply voltage of 1.9Vwhen the device is operating.It operates with the minimal supply voltage of 1.6V.A programmable I/O count of 208 has been recorded.You can achieve 178.57MHzfrequencies.The input signals are detected by 4dedicated inputs.An elementary building block consists of 2logic elements/cells.
LC4032ZC-75TN48E Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~130°C TJ
48 pin count
48 pins
LC4032ZC-75TN48E Applications
There are a lot of Lattice Semiconductor Corporation LC4032ZC-75TN48E CPLDs applications.
- Field programmable gate
- Wide Vin Industrial low power SMPS
- Programmable power management
- Dedicated input registers
- Cross-Matrix Switch
- Discrete logic functions
- STANDARD SERIAL INTERFACE UART
- Power automation
- LED Lighting systems
- Power up sequencing