L6926Q1TR
| Parameters | |
|---|---|
| Factory Lead Time | 14 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6926 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 95 % |
| Output Voltage | 5.5V |
| Output Type | Adjustable |
| Max Output Current | 800mA |
| Operating Supply Voltage | 5.5V |
| Voltage - Input (Min) | 2V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 200μA |
| Max Output Voltage | 5.5V |
| Voltage - Output (Min/Fixed) | 0.6V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 600kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 600mV |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6926Q1TR Overview
A Tape & Reel (TR) package is used in this voltage regulator to optimize performance. In this voltage regulator, there are a total of 8 terminations. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. The space-saving 8-VFDFN Exposed Pad package is available for this voltage regulator. 1 outputs have been configured in the voltage regulator 12v. On the output pins of this DC DC switching regulator, there is a Adjustable output generated. A Surface Mount mounting is required for this switching regulator. Keeping dc to dc voltage regulator's operating temperature at -40°C~150°C TJ is essential when operating. The switching frequency of this DC-DC switching regulator reaches 600kHz. A dc to dc voltage regulator's minimum input voltage of 2V is required for this voltage regulator to operate. The adjusting voltage regulator's output voltage (Min/Fixed) is 0.6V. 260 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. For operation, voltage regulator provides a nominal input voltage of 3.6V. Listed under the subcategory of Switching Regulator or Controllers is this voltage regulator 12v. The L6926 family of DC/DC regulators includes this DC/DC regulator. Voltage regulator is capable of giving voltage at 5.5V volts. During switching regulator operation, 8 pins are used. In order for this switching regulator to work properly, the output voltage should be at least 600mVV. Switching regulator has a maximum output current of 800mA A, which is sufficient to meet the requirements of operation. As a result, it is able to provide adjusting voltage regulator a maximum output voltage of 5.5V. With 5.5V as the supply voltage, this DC-DC switching regulator will operate. Voltage regulator consumes 200μA A of quiescent current without being affected by external factors.
L6926Q1TR Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
Operating supply voltage of 5.5V
L6926Q1TR Applications
There are a lot of STMicroelectronics L6926Q1TR Voltage Regulators applications.
- ATMs
- Low output voltage switching power supply circuits
- Large fire protection systems
- Hydro power
- Sensitive electronic devices
- Hydraulic presses
- Scientific testing
- Energy management systems
- CMM
- Balance equipment