IS80C286-20
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Packaging | Bulk |
| Published | 1996 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 4 |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 68 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Voltage | 5V |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR |
| Supply Current-Max | 310mA |
| Bit Size | 16 |
| Frequency (Max) | 20MHz |
| Data Bus Width | 16b |
| Address Bus Width | 24 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | NO |
| Height Seated (Max) | 4.57mm |
| Length | 24.23mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
IS80C286-20 Overview
Since the microprocessor is packed in PLCC, shipping overseas is convenient. In order to provide high reliability, advanced packaging method Bulk is used. I would rate this as a MICROPROCESSOR for the uPs/uCs/Peripheral ICs type. In total, there are 68 terminations. Turning on and running the embedded microprocessor with a 5V voltage supply should be possible. 16-Bit is its architecture. CPUs operate with a frequency of 20MHz Hz. Please refer to the datasheets for 68 pins functions. Typical Microprocessors cpu microprocessor. The size of data Bus of the CPU is based on 16b-bit system. An environment with a temperature higher than 85°C is not recommended for the embedded microprocessor. There are 68 pins injected into the embedded microprocessor body. With the Surface Mount mounted, this CPU is widely used in a wide range of applications. In this case, the CPU should reach 20MHz as its top frequency. There is a 5V function for the micro processor. In the datasheet, 5V power supplies are required for this embedded microprocessor. It is 5V on the CPU's core. A CPU can receive voltage 310mA higher than 310mA.
IS80C286-20 Features
16-Bit Structure
16b-Bit Data Bus Width
IS80C286-20 Applications
There are a lot of Intersil (Renesas Electronics America) IS80C286-20 Microprocessor applications.
- Electrocardiogram (EKG)
- Automatic control
- Tape drives
- Virtual reality VR robots
- Xbox
- Accu-check
- Computers and laptops-video calling, email, blogging
- Multi-meter
- Graphic terminals
- Magnetic resonance imaging (MRI)