IRU3037ACF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 400kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IRU3037 |
| Function | Step-Up, Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 23.75V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 4.2V~25V |
| Quiescent Current | 3.3mA |
| Control Features | Enable, Soft Start |
| Topology | Buck, Boost |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 90% |
| Clock Sync | No |
| Length | 4.4mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
IRU3037ACF Overview
This switching controller fits most application requirements since it is packaged in a 8-TSSOP (0.173, 4.40mm Width) package. 1 outputs are supported by the dc motor controller. The pmic is packaged in Tube solid enclosure. The system can process Transistor Driver dc switching's outputs (s). 4.2V~25V is the supply voltage and the operating voltage of the dc control. Worked in an dc switcher with a 0°C~70°C TA rating. It is suitable for general dc dc regulator when it is set to Surface Mount. Enable, Soft Start provides dcdc regulator efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminal (s) are designed at DUAL . The 8 terminations can be used for a wide range of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 5V. Searching "IRU3037" will return other relevant dc to dc converter ics. In total, switching converter has 8 pins. The type is a particular Switching Regulator or Controllers of switching converter. A 23.75V voltage of DC regulator was detected in the test statistics. If you are starting a new project, you should note the dc dc regulator's typical output current is 15A. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. A frequency of 400kHz is used by the switching controller. DC switchings that are dormant use 3.3mA.
IRU3037ACF Features
Transistor Driver Outputs
Enable, Soft Start
PULSE WIDTH MODULATION
Frequency: 400kHz
IRU3037ACF Applications
There are a lot of Infineon Technologies IRU3037ACF DC to DC converter applications.
- Gear/thread machining machines
- Telecommunications equipment
- Machining centers
- Motor controller circuits
- Series voltage regulation circuits
- Industrial controllers
- Network technology
- Combined machine tools
- CNC system
- Magnetohydrodynamic power