IR2111
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 8 |
| Published | 2004 |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Integrated Circuit (IC) |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 500mA |
| Operating Supply Voltage | 15V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 10V |
| Power Dissipation | 1W |
| Propagation Delay | 950 ns |
| Turn On Delay Time | 30 ns |
| Rise Time | 130ns |
| Fall Time (Typ) | 65 ns |
| Turn-Off Delay Time | 30 ns |
| Number of Drivers | 2 |
| Turn On Time | 0.95 μs |
| Output Peak Current Limit-Nom | 0.5A |
| High Side Driver | YES |
| Height Seated (Max) | 5.33mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
IR2111 Overview
Its DIP package is adopted for higher flexibility.A total of 2 drivers are integrated into its configuration.Its configuration is based on a total of 8 terminations.Mosfet driver is mounted using the Through Hole method.A total of 8 pins are available on the device.A supply voltage of 15V is required for operation.The maximum output current can amount to 500mA.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.The board contains 8 pins for component connections.Mosfet gate drivers is permissible to operate at a temperature of 125°C.The allowable minimum value of operating temperature is -40°C.This device operates at its maximum voltage of 20V.This device is designed to operate with a voltage of 10V.A voltage of 15V should be set for the operating supply voltage.
IR2111 Features
2 drivers
8 pins
IR2111 Applications
There are a lot of International Rectifier IR2111 gate drivers applications.
- Industrial Motor Inverter - Power Tools, Robotics
- Industrial Modules
- A/D drivers
- Solar inverters
- Telecom switch mode power supplies
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- High current laser/LED systems
- Portable Media Players
- Motor Drives
- Isolated Supplies for Motor Control