IPS511S
| Parameters | |
|---|---|
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Current Rating | 5A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G4 |
| Max Output Current | 1.7A |
| Operating Supply Voltage | 35V |
| Number of Channels | 1 |
| Interface | On/Off |
| Power Dissipation-Max | 1.56W |
| Nominal Supply Current | 700μA |
| Output Configuration | High Side |
| Power Dissipation | 1.56W |
| Current - Output | 3A |
| Output Current per Channel | 1.7A |
| Driver Number of Bits | 1 |
| Fault Protection | Over Temperature |
| Output Peak Current Limit-Nom | 3A |
| Drain to Source Resistance | 130mOhm |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 4.8mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | TO-263-5 |
| Number of Pins | 5 |
| Packaging | Bulk |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 110mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
IPS511S Overview
This is included in the TO-263-5 package.In the current state, 1 channels are accessible.A Bulk-shaped package holds it.4 terminations are present in total.This device has a terminal position of SINGLE.In total, there are 4 pins on it.A supply voltage of 14V allows for high efficiency.In order to operate, 5 pins are used.The gadget in Peripheral Drivers is self-contained.Positioned in direction of Surface Mount, it is at a right angle.Hot-swappable device is stable to operate at a temperature of 150°C°C at the maximum.Hot-swappable device maintains Hot-swappable devices reliabilHot-swappable devicey at a minimum working temperature of -40°C degrees Celsius.1.7A is the maximum output current required to meet the operation criteria.Despite its 110mOhm resistance, the device is not easily damaged.
IPS511S Features
The terminal position of 4
IPS511S Applications
There are a lot of International Rectifier IPS511S hot swap controllers applications.
- Current monitoring
- Reverse current protection
- Automatic restart after load failure
- Industrial
- High power circuit board
- Current monitor output
- Load transient protection
- Storage network
- Limitting the inrush current
- Backplane