IPS1021RTRRPBF
| Parameters | |
|---|---|
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Clamping Voltage | 36V |
| Output Current per Channel | 4.3A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 28V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Input Bias Current | 70μA |
| Rds On (Typ) | 20mOhm |
| Height | 2.3876mm |
| Length | 6.7056mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Supplier Device Package | D-Pak |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 20mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 2.5W |
| Max Power Dissipation | 2.5W |
| Current Rating | 13.5A |
| Base Part Number | IPS1021RPBF |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 4.3A |
| Operating Supply Voltage | 36V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 4.3A |
| Current | 4.3A |
| Output Configuration | Low Side |
| Power Dissipation | 2.5W |
| Output Current | 4.3A |
IPS1021RTRRPBF Overview
It is package in Tape & Reel (TR) case.There is a package for it in the TO-252-3, DPak (2 Leads + Tab), SC-63 package.Surface Mount is the mounting type of the LED driver.The switch type is General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The lighting driver has a total of 1 outputs that are available for use.To operate, it needs a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.It belongs to the IPS1021RPBF family.The 3 pins are used for the operation of the system.The maximum output of the LED driving board is 4.3AV.To meet the operation criteria, the maximum output current drops to 4.3A.As a result, it is mounted in the manner of Surface Mount.The LED driver has 20mOhm resistance.This case results in a 4.3A output current.In order to maximize efficiency, the supply voltage should be set to 36V.Keeping the operating temperature at 150°C°C ensures stable operation.In order to ensure reliability, it must operate at a minimum temperature of -40°C degrees Celsius.
IPS1021RTRRPBF Features
Resistance of 20mOhm
IPS1021RTRRPBF Applications
There are a lot of Infineon Technologies IPS1021RTRRPBF Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Handheld Devices
- Hot Swaps
- USB Ports/Hubs
- PDAs
- Hot Swap
- Notebook and Tablet Computers
- Portable Devices
- Smartphone and PDA
- Various applications equipped with buttons