IH5045MJE/883B
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -55°C~125°C TA |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 16 |
| JESD-30 Code | R-GDIP-T16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 75Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 54 dB |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Current - Leakage (IS(off)) (Max) | 1nA |
| On-state Resistance Match-Nom | 3Ohm |
| Switch Circuit | DPST - NO |
| Switch Time (Ton, Toff) (Max) | 400ns, 200ns |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Switch-on Time-Max | 400ns |
| Neg Supply Voltage-Min (Vsup) | -4.5V |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Height Seated (Max) | 5.08mm |
| RoHS Status | Non-RoHS Compliant |
IH5045MJE/883B Overview
Shipping overseas is convenient due to the electrical component's packing in 16-CDIP (0.300, 7.62mm). Mounted in Through Hole is this multiplexer. Multiplexers and demultiplexers have a ratio of 2:1. The operating temperature is extended to around -55°C~125°C TA. There are 16 terminations totally. A high-quality output is provided by the electrical component's 2 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. The electrical component body receives 16 pins. A DPST - NO switching circuit is used to build these analog multiplexers. The multiplexer consists of 2 circuits. Providing the analog switch ic with electricity requires a minimum voltage of 4.5V.
IH5045MJE/883B Features
2 Channels
Switch Circuit: DPST - NO
IH5045MJE/883B Applications
There are a lot of Maxim Integrated IH5045MJE/883B Analog Switches & Multiplexers ICs applications.
- HDTV
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Battery-powered systems
- Remote wireless modules
- Avionics and Military Systems
- Audio and video routing
- Avionics
- Video switching
- Microprocessor controlled systems
- Routers