IDT74LVC273APGG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Output Characteristics | 3-STATE |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.024 A |
| High Level Output Current | 24mA |
| Low Level Output Current | 24mA |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
IDT74LVC273APGG Overview
As a result, it is packaged as TSSOP. In total, it contains 1 elements. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. A voltage of 3.3V provides power to the D latch. Devices in the LVC/LCX/Zfamily are electronic devices. There is an electronic part that is mounted in the way of Surface Mount. It is designed with 20 pins. It has a clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. It is designed with 8bits. For high efficiency, the supply voltage should be kept at 3.3V. A 24mAvalue is set for the high level output current. A 24mAvalue is set for low-level output current. The operating temperature should be lower than 85°C. It is recommended that the operating temperature is higher than -40°C. It operates with the minimal supply voltage of 2.7V. 3.6Vis the maximum supply voltage supported by it. It adopts a logic IC of type D FLIP-FLOP. It is equipped with 1 functions . 20pins are provided on the D latch.
IDT74LVC273APGG Features
20 pins
8 Bits
1 Functions
20 pin count
IDT74LVC273APGG Applications
There are a lot of Integrated Device Technology (IDT) IDT74LVC273APGG Flip Flops applications.
- Memory
- ATE
- Single Down Count-Control Line
- Supports Live Insertion
- Dynamic threshold performance
- Circuit Design
- QML qualified product
- Data storage
- Common Clocks
- Guaranteed simultaneous switching noise level