IDT7200L50SO8
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 80mA |
| Clock Frequency | 15MHz |
| Access Time | 50 ns |
| Organization | 256X9 |
| Output Characteristics | 3-STATE |
| Memory Width | 9 |
| Standby Current-Max | 0.0005A |
| Memory Density | 2304 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 65 ns |
| Height Seated (Max) | 3.048mm |
| Length | 18.3642mm |
| Width | 8.763mm |
| RoHS Status | Non-RoHS Compliant |
IDT7200L50SO8 Overview
SOIC is the package in which FIFO memory chip is contained.There's a Tape & Reel (TR) on the package.It is recommended that memory IC be mounted in the Surface Mount direction.When the supply voltage is 5V , high efficiency is possible.28 terminations are contained in FIFO means.In order to operate it, it requires 80mA volts of current.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.In FIFOs , this gadget is self-contained.It has a OTHER FIFO memory type IC.There are a total of 28 pins on this board.It is normal for a component to be equipped with 5V power supplies.The gadget can also generate a value of RETRANSMIT .A FIFO memory IC's maximum supply voltage of 5.5V is set for Vsup.Maintain the supply voltage (Vsup) above 4.5V for normal operation.The FIFO memory IC runs at a frequency of 15MHz .
IDT7200L50SO8 Features
FIFOs category
Clock frequency of 15MHz
IDT7200L50SO8 Applications
There are a lot of Integrated Device Technology (IDT) IDT7200L50SO8 FIFOs Memory applications.
- SPI Bus Flash Memory Devices
- Signal processing
- Networking
- Consumer Systems
- SPI Bus Flash Memory Device
- Optical memories
- Test site
- Video time base correction
- Wireless
- IP Camera Buffer