HI3-0508A-5
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Additional Feature | OVERVOLTAGE PROTECTION |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 16 |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 1.8kOhm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 30pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 10pF 25pF |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns (Typ) |
| Voltage - Supply, Dual (V±) | ±15V |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
HI3-0508A-5 Overview
Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. This high-reliability packaging method uses advanced packaging methods Tube. In Through Hole, you'll find this switch device. 8:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around 0°C~75°C TA. Totally, there are 16 terminations. A high-quality output is provided by the electrical component's 8 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. A total of 16 pins are injected into the electrical part body. A 1 circuit is present in this switch device. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. Additional features of the electronic component include: OVERVOLTAGE PROTECTION. Providing power to the analogue multiplexer requires a voltage of 4.5VV.
HI3-0508A-5 Features
8 Channels
Additional Features: OVERVOLTAGE PROTECTION
HI3-0508A-5 Applications
There are a lot of Rochester Electronics, LLC HI3-0508A-5 Analog Switches & Multiplexers ICs applications.
- Cable Modem
- Cellular phones
- Avionics
- CSU
- Imaging
- Fiber In The Loop (FITL)
- Residential Gateways, Home Gateway/Router
- Audio and video switching
- Wireless Local Loop
- Precision test equipment