| Parameters |
| Mounting Type |
Through Hole |
| Package / Case |
8-DIP (0.300, 7.62mm) |
| Surface Mount |
NO |
| Operating Temperature |
-25°C~85°C TA |
| Packaging |
Tube |
| Series |
FPS™ |
| JESD-609 Code |
e3 |
| Pbfree Code |
yes |
| Part Status |
Obsolete |
| Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
| Number of Terminations |
8 |
| Terminal Finish |
MATTE TIN |
| Power (Watts) |
35W |
| Terminal Position |
DUAL |
| Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
| Number of Functions |
1 |
| Terminal Pitch |
2.54mm |
| Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
| Pin Count |
8 |
| JESD-30 Code |
R-PDIP-T8 |
| Analog IC - Other Type |
SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) |
8V~21V |
| Topology |
Flyback |
| Control Mode |
CURRENT-MODE |
| Output Current-Max |
1.68A |
| Frequency - Switching |
67kHz |
| Control Technique |
PULSE WIDTH MODULATION |
| Switcher Configuration |
SINGLE |
| Internal Switch(s) |
Yes |
| Fault Protection |
Current Limiting, Over Load, Over Temperature, Over Voltage |
| Duty Cycle |
77% |
| Output Isolation |
Isolated |
| Voltage - Breakdown |
700V |
| Voltage - Start Up |
12V |
| Height Seated (Max) |
5.08mm |
| Length |
9.415mm |
| Width |
7.62mm |
| RoHS Status |
ROHS3 Compliant |
FSFM261N Overview
There is a ac to dc converter embedded in package 8-DIP (0.300, 7.62mm) .Tube case is available for the ac dc converter.As you can see, this AC/DC converter is mounted in the way of Through Hole .For the ac dc converter to perform at its best, it should be operated at a temperature of -25°C~85°C TA °C.In this AC DC converter, the analog IC type is SWITCHING CONTROLLER .67kHz is the switching frequency.Vcc/Vdd can be used within the range of 8V~21V supply voltage.As a result, it has a total of 8 terminations.The pins of the ac-dc converter count up to 8 .It belongs to a manufacturer family of FPS? .A maximum current of 1.68A may be supplied to the ac to dc inverter.
FSFM261N Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 67kHz
FSFM261N Applications
There are a lot of Rochester Electronics, LLC FSFM261N AC DC Converters applications.
- Standby Power Supply
- LED lights
- PDAs
- Low power ac?dc Adapters for Chargers
- Adaptors for DSCs
- RCC SMPS
- Automotive Clusters
- Chargers for cell/cordless phones
- ZigBee
- Set-top boxes