FPF1104
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFBGA, WLCSP |
| Number of Pins | 4 |
| Weight | 42mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | IntelliMAX™ |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 150mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1W |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF1104 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 1.2A |
| Voltage | 4V |
| Interface | On/Off |
| Nominal Supply Current | 3μA |
| Current | 1.2A |
| Output Configuration | High Side |
| Power Dissipation | 1W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.2V |
| Max Input Voltage | 4V |
| Turn-Off Delay Time | 2.5 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.2V~4V |
| Driver Number of Bits | 1 |
| Rds On (Typ) | 35m Ω |
| Height | 332μm |
| Length | 960μm |
| Width | 960μm |
| RoHS Status | RoHS Compliant |
FPF1104 Overview
It is packaged in the form of a Tape & Reel (TR).There is a 4-UFBGA, WLCSP package that includes it.A Surface Mount mounting is used for the LED driving board.It owns General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~85°C TA.There is a default setting of 1 for output.In order to operate, it requires a voltage supply of Not Required.A maximum voltage of P-Channel volts is available from the output of this LED driver.Currently, the LED driving board is equipped with Load Discharge, Slew Rate Controlled features.It belongs to the family FPF1104.It has a total of 4 terminations.For operation, 4 pins are used.The maximum output current drops to 1.2A in order to meet the operation criteria.As a result, it is mounted in the manner of Surface Mount.It has a resistance of 150mOhm.It is part of the IntelliMAX? series.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.It has a maximum input voltage of 4V volts.Input voltage must be at least 1.2V volts.
FPF1104 Features
Resistance of 150mOhm
FPF1104 Applications
There are a lot of ON Semiconductor FPF1104 Power Switches ICs applications.
- Handheld Devices
- Smartphone and PDA
- Notebook PC
- USB3.1 Power Delivery
- PDAs
- Wireless Modem Data Cards
- Wireless/Networking Cards
- Various applications equipped with buttons
- Hot Swap
- Wearable Devices