EPM7160STC100-10
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000S |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM7160 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 84 |
| Clock Frequency | 125MHz |
| Number of Gates | 3200 |
| Output Function | MACROCELL |
| Number of Macro Cells | 160 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 10 |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
EPM7160STC100-10 Overview
160 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is enclosed in a 100-TQFP package.As a result, it has 84 I/O ports programmed.Terminations of devices are set to [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.An electrical supply voltage of 5V is used to power it.It belongs to the family [0].As a result, it is packaged as Tray.To ensure reliability, the device operates at a temperature of [0].It is recommended that the chip be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the MAX? 7000S series.You can find its related parts in the [0].There are 3200 gates, which are devices that acts as a building block for digital circuits. There are 10 logic elements/blocks.This device runs on 3.3/55Vvolts of electricity.In this case, the maximum supply voltage (Vsup) reaches 5.25V.A supply voltage (Vsup) of greater than 4.75V should be used.It should not exceed 125MHzin its clock frequency.
EPM7160STC100-10 Features
100-TQFP package
84 I/Os
The operating temperature of 0°C~70°C TA
3.3/55V power supplies
EPM7160STC100-10 Applications
There are a lot of Intel EPM7160STC100-10 CPLDs applications.
- Multiple DIP Switch Replacement
- Address decoders
- Cross-Matrix Switch
- Digital systems
- LED Lighting systems
- Digital multiplexers
- Custom state machines
- Timing control
- STANDARD SERIAL INTERFACE UART
- D/T registers and latches