EPM7032AELC44-10N
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3.3V |
| Frequency | 103.1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 227.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 600 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 2 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 3.81mm |
| Length | 16.59mm |
| Width | 16.59mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7032AELC44-10N Overview
There are 32 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is contained in package [0].It is programmed with 36 I/Os.44terminations are programmed into the device.This electrical component has a terminal position of 0.The device is powered by a voltage of 3.3V volts.The part belongs to Programmable Logic Devices family.It is programmed with 44 pins.As a building block for digital circuits, there are 600gates.If high efficiency is desired, the supply voltage should be kept at [0].Data is stored using [0].A Surface Mountis mounted on this electronic component.There are 44 pins embedded in the device.It operates at a maximum supply voltage of 3.6V volts.Normally, it operates with a voltage of 3VV as its minimum supply voltage.In total, there are 36programmable I/Os.A frequency of 103.1MHzcan be achieved.Ideally, the operating temperature should be greater than 0°C.A temperature less than 70°Cshould be used for operation.The logic block consists of 2 l logic blocks (LABs).It is recommended that the maximum frequency be less than 227.3MHz.A programmable logic type is classified as EE PLD.
EPM7032AELC44-10N Features
PLCC package
36 I/Os
44 pin count
44 pins
2 logic blocks (LABs)
EPM7032AELC44-10N Applications
There are a lot of Altera EPM7032AELC44-10N CPLDs applications.
- White goods (Washing, Cold, Aircon ,...)
- Power up sequencing
- I2C BUS INTERFACE
- State machine control
- Complex programmable logic devices
- I/O PORTS (MCU MODULE)
- Discrete logic functions
- I/O expansion
- High speed graphics processing
- Random logic replacement