EPM570F256I5
| Parameters | |
|---|---|
| Base Part Number | EPM570 |
| JESD-30 Code | S-PBGA-B256 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 2.625V |
| Power Supplies | 1.5/3.32.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.375V |
| Programmable Type | In System Programmable |
| Number of I/O | 160 |
| Propagation Delay | 8.7 ns |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.5V 3.3V |
| Delay Time tpd(1) Max | 5.4ns |
| Number of Logic Elements/Blocks | 570 |
| Height Seated (Max) | 2.2mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
| Factory Lead Time | 8 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tray |
| Published | 2009 |
| Series | MAX® II |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
EPM570F256I5 Overview
This network has 440macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).There is a 256-BGA package containing it.This device has 160 I/O ports programmed into it.The termination of a device is set to [0].The terminal position of this electrical component is BOTTOM.There is 2.5V voltage supply for this device.It belongs to the family [0].It is recommended that the chip be packaged by Tray.The operating temperature of the machine is -40°C~100°C TJ to ensure its reliability.It is recommended to mount the chip by Surface Mount.In FPGA terms, it is a type of MAX? IIseries FPGA.When using this device, IT CAN ALSO OPERATE AT 3.3Vcan also be found.There are related parts in [0].570logic blocks/elements are present.Currently, it is powered by 1.5/3.32.5/3.3Vsources.In order to ensure proper operation, a maximum supply voltage (Vsup) of 2.625V is required.Vsup (supply voltage) must be greater than 2.375V.
EPM570F256I5 Features
256-BGA package
160 I/Os
The operating temperature of -40°C~100°C TJ
1.5/3.32.5/3.3V power supplies
EPM570F256I5 Applications
There are a lot of Intel EPM570F256I5 CPLDs applications.
- Software-Driven Hardware Configuration
- Timing control
- Power up sequencing
- Digital systems
- I2C BUS INTERFACE
- Bootloaders for FPGAs
- Address decoders
- ON-CHIP OSCILLATOR CIRCUIT
- Reset swapping
- Page register