EL7212CNZ
| Parameters | |
|---|---|
| Output Peak Current Limit-Nom | 2A |
| High Side Driver | NO |
| Height | 3.3mm |
| Length | 9.56mm |
| Width | 6.35mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 7 Weeks |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 8 |
| Published | 2002 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 4.5V |
| Power Dissipation-Max | 1.05W |
| Nominal Supply Current | 2.5mA |
| Max Supply Current | 2.5mA |
| Current - Output | 4A |
| Turn On Delay Time | 25 ns |
| Voltage - Output | 15V |
| Rise Time | 20ns |
| Fall Time (Typ) | 20 ns |
| Turn-Off Delay Time | 25 ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Number of Drivers | 2 |
EL7212CNZ Overview
Its PDIP package is adopted for higher flexibility.This device is equipped with 2 drivers for its configuration.The configuration is based on 8 terminations.The device is mounted using Through Hole.Mosfet driver is configured wMosfet driverh 8 pins when designing.A supply voltage of 15V is required for operation.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible to achieve a maximum output current of 2A.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The allowable maximum value of operating temperature is 85°C.-40°C is the minimum operating temperature.To increase stability, keep the supply current at 2.5mA.For operation, it requires a voltage of 15V.In order for the device to operate, a supply voltage of 4.5V must be applied.As a result, the current it emits is 4A.The output voltage is set to 15V.
EL7212CNZ Features
2 drivers
8 pins
EL7212CNZ Applications
There are a lot of Intersil (Renesas Electronics America) EL7212CNZ gate drivers applications.
- RGB applications
- Solar inverters
- LCD/LCoS/DLP portable and embedded pico projectors
- Dual-Battery Systems
- Digitally controlled power supplies
- Motor controllers
- Telecom switch mode power supplies
- Isolated Supplies for Motor Control
- Motor Controls
- 3-Phase Motor Inverter Driver