E3Z-T81A
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Screw |
| Number of Pins | 4 |
| Housing Material | PBT |
| Operating Temperature | -25°C~55°C |
| Published | 2004 |
| Series | E3Z |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Wire |
| Additional Feature | IP 67 REVERSE POLARITY, SHORT CIRCUIT PROTECTION |
| Voltage - Supply | 12V~24V |
| Ingress Protection | IEC IP67, IP69K |
| Reach Compliance Code | unknown |
| Output Type | ANALOG CURRENT |
| Operating Supply Voltage | 24V |
| Output Configuration | PNP Transistor |
| Cable Length | 2m |
| Response Time | 1ms |
| Adjustment Type | Single-Turn |
| Sensing Distance | 15m |
| Sensing Method | Through-Beam |
| Connection Method | Cable |
| Light Source | Infrared (870nm) |
| Output Range | 100mA |
| Measurement Range-Max | 10000 mm |
| Height | 20mm |
| Length | 33.1mm |
| Width | 10.8mm |
| RoHS Status | RoHS Compliant |
| Ratings | IP67 |
E3Z-T81A Overview
The temperature of photoelectric sensor should be set to -25°C~55°C to ensure reliable performance. To make these electronic components work, they should be supplied with 12V~24V voltage. For photoelectric sensors, 1ms is ideal. 4 pins must be connected for the photoelectric sensor to work. Photoelectric sensors should have their supply voltage set to 0.
E3Z-T81A Features
Sensing Distance: 15m
4 pins
Response Time: 1ms
Operating Temperature: -25°C~55°C
E3Z Series
E3Z-T81A Applications
There are a lot of Omron Automation and Safety E3Z-T81A Photoelectric Sensors applications.
- Checking objects on production lines or conveyors
- Luminescence sensors
- Entrance and gate
- Measuring distance
- Zone scanners
- Counting small objects
- Automatic doors
- Monitoring bigger areas for objects with light grids
- Mechanical engineering
- Material handling