E3Z-R86
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Brackets, Screw |
| Number of Pins | 4 |
| Material | Polybutylene |
| Body Material | PBT |
| Operating Temperature | -40°C~55°C |
| Published | 2001 |
| Series | E3Z |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Connector |
| Connector Type | Cable, Connector |
| Additional Feature | IP 67 REVERSE POLARITY, SHORT CIRCUIT PROTECTION |
| Voltage - Supply | 12V~24V |
| Ingress Protection | IEC IP67, IP69K |
| Output Type | ANALOG CURRENT |
| Output Configuration | PNP - Dark-ON/Light-ON - Selectable |
| Output Current | 100mA |
| Turn On Delay Time | 1 ms |
| Response Time | 1000 μs |
| Adjustment Type | Single-Turn |
| Sensing Distance | 3.937 ~ 157.480 (100mm ~ 4m) ADJ |
| Sensing Method | Retroreflective |
| Sensors/Transducers Type | LINEAR POSITION SENSOR,PHOTOELECTRIC,THROUGH BEAM |
| Max Supply Voltage (DC) | 24V |
| Connection Method | Cable |
| Light Source | Red (660nm) |
| Min Supply Voltage (DC) | 12V |
| Output Range | 100mA |
| Height | 20mm |
| Length | 43.5mm |
| Width | 10.8mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Ratings | IP67, IP69K |
E3Z-R86 Overview
It is recommended to set the temperature of a photoelectric sensor to -40°C~55°C in order to ensure reliable operation. This electronic component must have a voltage of 0 in order to function in a circuit or system. A response time of 1000 μs is considered ideal for photoelectric sensors. Photoelectric sensors work properly when the 4 pins are connected. Photoelectric sensors need an output current of 100mA in order to operate. The maximum voltage of 24V in a DC circuit can be applied to the photoelectric sensor without causing damage. As low a voltage as possible, such as 12V, can be used by this photoelectric sensor.
E3Z-R86 Features
Sensing Distance: 3.937 ~ 157.480 (100mm ~ 4m) ADJ
4 pins
Response Time: 1000 μs
Operating Temperature: -40°C~55°C
E3Z Series
Maximal Supply Voltage (DC): 24V
Minimal Supply Voltage (DC): 12V
Turn On Delay Time: 1 ms
E3Z-R86 Applications
There are a lot of Omron Automation and Safety E3Z-R86 Photoelectric Sensors applications.
- Passive infrared sensors
- Contrast sensors
- Automatic doors
- Checking objects on production lines or conveyors
- Automotive industry
- Pharmaceutical industry
- Measuring distance
- Entrance and gate
- Zone scanners
- detect objects