E3Z-LS86
| Parameters | |
|---|---|
| Factory Lead Time | 2 Weeks |
| Surface Mount | NO |
| Mounting Feature | BOARD MOUNT |
| Number of Pins | 4 |
| Housing Material | PBT |
| Operating Temperature | -25°C~55°C |
| Published | 2004 |
| Series | E3Z |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Additional Feature | IP 67 REVERSE POLARITY, SHORT CIRCUIT PROTECTION |
| Voltage - Supply | 12V~24V |
| Ingress Protection | IEC IP67 |
| Body Length or Diameter | 20mm |
| Body Breadth | 10.8 mm |
| Output Type | ANALOG CURRENT |
| Output Configuration | PNP - Dark-ON/Light-ON - Selectable |
| Output Current | 100mA |
| Max Voltage Rating (DC) | 24V |
| Turn On Delay Time | 1 ms |
| Response Time | 1000 μs |
| Adjustment Type | Five-Turn Endless Adjuster |
| Sensing Distance | 0.787 ~ 7.874 (20mm ~ 200mm) ADJ |
| Sensing Method | Reflective, Diffuse |
| Sensors/Transducers Type | LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE |
| Max Supply Voltage (DC) | 24V |
| Connection Method | Connector |
| Light Source | Red (680nm) |
| Min Supply Voltage (DC) | 12V |
| Output Range | 100mA |
| Measurement Range-Max | 200 mm |
| Measurement Range-Min | 20 mm |
| Body Height | 31mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Ratings | IP67 |
E3Z-LS86 Overview
For reliable performance, the temperature of the photoelectric sensor should be set to -25°C~55°C. If these electronic components are to work, they should receive 12V~24V voltage into the circuit or system. Photoelectric sensors have an ideal response time of 1000 μs. The photoelectric sensor must have the 4 pins connected to work properly. Photoelectric sensors require an output current of 100mA to operate. A photoelectric sensor can be operated at a maximum voltage of 24V in a DC circuit without damage occurring. Photoelectric sensors work at as low a voltage as possible, for example 12V. As a rule of thumb, photoelectric sensors operate with maximum voltages of zero.
E3Z-LS86 Features
Sensing Distance: 0.787 ~ 7.874 (20mm ~ 200mm) ADJ
4 pins
Response Time: 1000 μs
Operating Temperature: -25°C~55°C
E3Z Series
Maximal Supply Voltage (DC): 24V
Minimal Supply Voltage (DC): 12V
Turn On Delay Time: 1 ms
E3Z-LS86 Applications
There are a lot of Omron Automation and Safety E3Z-LS86 Photoelectric Sensors applications.
- Pharmaceutical industry
- Luminescence sensors
- Zone scanners
- Entrance and gate
- Checking objects on production lines or conveyors
- detect objects
- Monitoring bigger areas for objects with light grids
- Logistics and materials handling
- Passive infrared sensors
- Material handling