E3JM-DS70M4-G
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Screw |
| Housing Material | ABS |
| Operating Temperature | -25°C~55°C |
| Published | 1999 |
| Series | E3JM |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Terminal Block |
| Connector Type | Terminal Block |
| Voltage - Supply | 12V~240V 24V~240V |
| Ingress Protection | IEC IP66 |
| Output Configuration | Relay - Dark-ON/Light-ON - Selectable |
| Throw Configuration | SPDT |
| Turn On Delay Time | 30 ms |
| Adjustment Type | Single-Turn |
| Sensing Distance | 27.559 (700mm) |
| Power Consumption | 2W |
| Sensing Method | Reflective, Diffuse |
| Sensors/Transducers Type | LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE |
| Max Supply Voltage (DC) | 240V |
| Connection Method | Terminal Block |
| Light Source | Infrared (950nm) |
| Min Supply Voltage (DC) | 12V |
| Max Supply Voltage (AC) | 240.24kV |
| Min Supply Voltage (AC) | 2.412kV |
| Height | 65mm |
| Length | 75mm |
| Width | 25mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Ratings | IP66 |
E3JM-DS70M4-G Overview
To maintain reliable performance, the photoelectric sensor should have a temperature of -25°C~55°C. It is necessary to provide these electronic components with a voltage of 0 to make them work in a circuit or system. DC circuit can apply a maximum voltage of 240V without harming the photoelectric sensor. Low voltages, such as 12V, are possible with this photoelectric sensor.
E3JM-DS70M4-G Features
Sensing Distance: 27.559 (700mm)
Operating Temperature: -25°C~55°C
E3JM Series
Maximal Supply Voltage (DC): 240V
Minimal Supply Voltage (DC): 12V
Turn On Delay Time: 30 ms
E3JM-DS70M4-G Applications
There are a lot of Omron Automation and Safety E3JM-DS70M4-G Photoelectric Sensors applications.
- detect objects
- Mechanical engineering
- Automatic doors
- Contrast sensors
- Counting small objects
- Pharmaceutical industry
- Zone scanners
- Passive infrared sensors
- Detecting colours
- Measuring distance