E3FB-RP22
| Parameters | |
|---|---|
| Factory Lead Time | 13 Weeks |
| Number of Pins | 4 |
| Housing Material | Brass |
| Operating Temperature | -25°C~55°C |
| Published | 2012 |
| Series | E3FB |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Connector Type | Connector |
| Voltage - Supply | 10V~30V |
| Ingress Protection | IEC IP67, IP69K |
| Operating Supply Voltage | 30V |
| Output Configuration | PNP - Dark-ON/Light-ON - Selectable |
| Output Current | 100mA |
| Response Time | 500μs |
| Adjustment Type | Single-Turn |
| Sensing Distance | 0 ~ 19.685 (0mm ~ 500mm) |
| Sensing Method | Retroreflective |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector, M12, 4POS |
| Light Source | Red LED |
| Min Supply Voltage (DC) | 10V |
| Length | 48mm |
| Width | 18.5mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Ratings | IP67 |
E3FB-RP22 Overview
For reliable performance, set the temperature of the photoelectric sensor to -25°C~55°C. It is necessary to provide these electronic components with a voltage of 0 to make them work in a circuit or system. Photoelectric sensors should have a response time of 500μs. The photoelectric sensor must have the 4 pins connected to work properly. In order for a photoelectric sensor to function, the output current should be 100mA. Photoelectric sensors can be damaged by a voltage of 30V in DC circuit. Unlike most photoelectric sensors, this one operates at a very low voltage such as 0 volts. If you want the best performance, set the supply voltage to 30V.
E3FB-RP22 Features
Sensing Distance: 0 ~ 19.685 (0mm ~ 500mm)
4 pins
Response Time: 500μs
Operating Temperature: -25°C~55°C
E3FB Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
E3FB-RP22 Applications
There are a lot of Omron Automation and Safety E3FB-RP22 Photoelectric Sensors applications.
- Entrance and gate
- Passive infrared sensors
- Material handling
- Automotive industry
- Measuring distance
- Zone scanners
- Mechanical engineering
- Contrast sensors
- Pharmaceutical industry
- Luminescence sensors