E3FB-BP22
| Parameters | |
|---|---|
| Factory Lead Time | 3 Weeks |
| Number of Pins | 4 |
| Housing Material | Brass |
| Operating Temperature | -25°C~55°C |
| Published | 2012 |
| Series | E3FB |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Connector |
| Connector Type | Connector |
| Max Operating Temperature | 55°C |
| Min Operating Temperature | -25°C |
| Voltage - Supply | 10V~30V |
| Ingress Protection | IEC IP67, IP69K |
| Operating Supply Voltage | 30V |
| Output Configuration | PNP - Dark-ON/Light-ON - Selectable |
| Output Current | 100mA |
| Response Time | 500μs |
| Adjustment Type | Single-Turn |
| Sensing Distance | 3.937 ~ 78.740 (100mm ~ 2m) ADJ |
| Sensing Method | Reflective |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector, M12, 4POS |
| Light Source | Red LED |
| Min Supply Voltage (DC) | 10V |
| Length | 48mm |
| Width | 18.5mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Ratings | IP67 |
E3FB-BP22 Overview
You should set the photoelectric sensor's temperature to -25°C~55°C for reliable performance. For these electronic components to work, the voltage should be provided by 10V~30V. A photoelectric sensor is considered ideal if its response time is 500μs. Ensure reliability by operating the photoelectric sensor at -25°C degrees Celsius or lower. It is possible to operate on a reliable level at a temperature of 55°C. 4 pins must be connected to the photoelectric sensor for it to function correctly. Photoelectric sensors must have an output current of 100mA in order to operate. In a DC circuit, you can apply a voltage of 30V without damaging the photoelectric sensor. Ideally, this photoelectric sensor should operate at a low voltage, such as 0V. Photoelectric sensors should have a supply voltage of 30V in order to be most effective.
E3FB-BP22 Features
Sensing Distance: 3.937 ~ 78.740 (100mm ~ 2m) ADJ
4 pins
Response Time: 500μs
Operating Temperature: -25°C~55°C
E3FB Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
E3FB-BP22 Applications
There are a lot of Omron Automation and Safety E3FB-BP22 Photoelectric Sensors applications.
- Mechanical engineering
- Pharmaceutical industry
- Entrance and gate
- Automatic doors
- Checking objects on production lines or conveyors
- Counting small objects
- Automotive industry
- Measuring distance
- Luminescence sensors
- Detecting colours