DSPIC30F3011-20E/ML
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F3011 |
| Pin Count | 44 |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 24kB |
| Oscillator Type | Internal |
| Number of I/O | 30 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 24KB 8K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 9x10b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 8192 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 512 |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F3011-20E/ML Overview
For space savings, it is available in the 44-VQFN Exposed Pad package. The way of mounting it is Surface Mount. This item can be found in package Tube. It is equipped with a dsPIC core processor. When working, the temperature should be kept at -40°C~125°C TA. FLASH is its program memory type. There are 30 I/Os on it. It has a base part number of DSPIC30F3011 that can be used to find other components that are comparable. A QUAD position is assigned to its terminals. It has 44 terminationals. There are a number of electrical components in the dsPIC? 30F series, including this one. The 5V supply voltage enables high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. A total of 44 pins are required to construct this device. The method of Surface Mount is used to mount it. It has a total of 44 pins on it. Subcategory Digital Signal Processors includes this component. A device with a memory size of 24kB can store programs and data. It is highly efficient when it works at a frequency of 20MHz. There are 5 timers/counters. Using oscillator type Internal makes it work.
DSPIC30F3011-20E/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F3011-20E/ML Applications
There are a lot of Microchip Technology DSPIC30F3011-20E/ML Microcontroller applications.
- 3D printers
- Dryers
- Entertainment-radios, CD players, televisions
- Aerospace navigation systems
- Scanners
- Graphic terminals
- Torpedo guidance
- Vacuum cleaners
- Hard drives
- Data acquisition and control