DG9434DS-T1-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Weight | 40.001177mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 60Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 515mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 10 |
| Base Part Number | DG9434 |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1μA |
| Power Dissipation | 515mW |
| Max Supply Current | -1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 35 ns |
| Number of Inputs | 2 |
| Supply Type | Single |
| Turn-Off Delay Time | 18 ns |
| On-State Resistance (Max) | 30Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 77 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF 7.8pF |
| On-state Resistance Match-Nom | 0.4Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 35ns, 18ns |
| Charge Injection | 0.36pC |
| Channel-to-Channel Matching (ΔRon) | 300m Ω |
| Crosstalk | -96dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 100ns |
| Voltage - Supply, Single (V+) | 2.7V~12V |
| Height | 1.2mm |
| Length | 2.9mm |
| Width | 1.65mm |
| RoHS Status | ROHS3 Compliant |
DG9434DS-T1-E3 Overview
Presented in SOT-23-8, this electrical component is convenient for overseas shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. Multiplexers like this are mounted in the Surface Mount position. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operational temperature extended around -40°C~85°C TA. In total, there are 8 terminations. The electronic part delivers high-quality output through its 1 channels. When the electronic component is given a voltage of 3V, it should be turned on and run. The electronic part body is injected with 8 pins. SPST - NO/NC switching circuits are used in these analog switch ics. Look for analog switch ic variants by searching with DG9434. A 60Ohm internal resistance characterizes this multiplexer. You can find the functions of the 8 pins in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. In a normalsituation, users should not supply the switches with voltage higher than 12V. Digital switch that provides Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 2.7V. The switch device would be able to operate with 1μA current. An analogue multiplexer drains from a single voltage supply at 2.7V~12V. The switch multiplexer may be damaged if it is exposed to voltage greater than -1μA. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. There are 2 inputs to be operated.
DG9434DS-T1-E3 Features
1 Channels
Switch Circuit: SPST - NO/NC
1μA Supply Current
DG9434DS-T1-E3 Applications
There are a lot of Vishay Siliconix DG9434DS-T1-E3 Analog Switches & Multiplexers ICs applications.
- Microwave transmission systems
- Precision instrumentation
- CSU
- Relay Replacement
- SDH/SONET multiplexers
- Optical Applications
- Multiplexers
- ATM
- ISDN NT1/TA
- PBX interfaces