DG9262DY-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2013 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 60Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 400mW |
| Base Part Number | DG9262 |
| Number of Outputs | 2 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1μA |
| Power Dissipation | 400mW |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 75 ns |
| Number of Inputs | 2 |
| Supply Type | Single |
| Turn-Off Delay Time | 50 ns |
| On-State Resistance (Max) | 60Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 7pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 75ns, 50ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 400mOhm |
| Crosstalk | -90dB @ 1MHz |
| Voltage - Supply, Single (V+) | 2.7V~12V |
| Height | 1.55mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
DG9262DY-E3 Overview
This electronic part is conveniently packaged in 8-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tube. In Surface Mount, this analog switch is mounted. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operational temperature extended around -40°C~85°C TA. By its 2 channels, the electronic component provides high-quality output. Unlike digital switches, these are based on SPST - NC switching circuits. The multiplexer consists of 2 circuits. Search with DG9262 if you are looking for analog multiplexer variants. There is 60Ohm internal resistance in this digital multiplexer. For details about the functions of 8 pins, please refer to the datasheets. normally, users should not supply switches with voltages higher than 12V. Digital switch that provides Single power at a cost-effective price. A low voltage of 2.7V should be applied to the electronic component. For this digital switch to work, 1μA current would suffice. Draining from a single voltage supply, this analog switch requires a voltage of 2.7V~12V. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. A 2 input needs to be operated. Temperatures higher than 85°C are not recommended for operation of the analogue multiplexer. An output of 2 is provided by the digital multiplexer. There is a 8-SOIC package offered by suppliers.
DG9262DY-E3 Features
2 Channels
Switch Circuit: SPST - NC
1μA Supply Current
DG9262DY-E3 Applications
There are a lot of Vishay Siliconix DG9262DY-E3 Analog Switches & Multiplexers ICs applications.
- Cross Connects
- Video switching
- Industrial and process control systems
- Relay Replacement
- High reliability control systems
- E1 Multiplexer
- PBX interfaces
- Precision data acquisition
- PDH Multiplexers
- Battery-powered systems