DG723DQ-T1-GE3
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Weight | 139.989945mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Digi-Reel® |
| Published | 2010 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 4.5Ohm |
| Additional Feature | VIDEO APPLICATION |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 320mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | DG723 |
| Pin Count | 8 |
| Polarity | Non-Inverting |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 2μA |
| Nominal Supply Current | 2μA |
| Max Supply Current | 2μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 30 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 35 ns |
| -3db Bandwidth | 366MHz |
| On-State Resistance (Max) | 4.5Ohm |
| High Level Output Current | 50mA |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 47 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 9pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 30ns, 35ns |
| Charge Injection | 2.2pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -90dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 55ns |
| Switch-off Time-Max | 40ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height | 950μm |
| Length | 3mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DG723DQ-T1-GE3 Overview
Packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad, the electronic component is convenient for shipping overseas. The advanced packaging method Digi-Reel? provides high reliability. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 1:1. Increasing operating temperature to around -40°C~85°C TA. Totally, there are 8 terminations. A electrical component with 1 channels is capable of high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. 8 pins are injected to the electronic part body. Circuits based on SPST - NO/NC switching are used to construct these analog switch ics. This multiplexer is composed of 2 circuits. Search with DG723 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 4.5Ohm. To find out what the 8 pins do, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Users shouldn't supply more than 5.5V voltage to the switch device. A analog switch ic that has a cost-effective Single supply type. It is recommended that the electrical component receives a voltage of 1.8V. This multiplexer would work with 2μA current. The voltage required by this switch device is 1.8V~5.5V, draining from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 2μA. There is also VIDEO APPLICATION to look out for in this electronic part.
DG723DQ-T1-GE3 Features
1 Channels
Switch Circuit: SPST - NO/NC
2μA Supply Current
-3db Bandwidth: 366MHz
Additional Features: VIDEO APPLICATION
DG723DQ-T1-GE3 Applications
There are a lot of Vishay Siliconix DG723DQ-T1-GE3 Analog Switches & Multiplexers ICs applications.
- Relay replacements
- Remote Powered Equipment
- Automotive applications
- HDTV
- RGB switches
- Channelized and Unchannelized DS3 applications
- Isolation
- High speed data transmission line cards
- Relay Replacement
- Wireless Local Loop