DG509ADY-T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Power Supplies | +-15V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 450Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 12pF |
| On-state Resistance Match-Nom | 27Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1μs |
| Channel-to-Channel Matching (ΔRon) | 27 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 1500ns |
| Switch-off Time-Max | 1000ns |
| Neg Supply Voltage-Min (Vsup) | -4.5V |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
DG509ADY-T Overview
Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a ratio of 4:1. The operating temperature is extended to around -40°C~85°C TA. In total, there have been 16 terminations. High-quality output is provided by the electronic component's 4 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. It is injected into the electrical part body with 16 pins. A SP4T switching circuit is used for these analog switches. 2 circuits are used in this analogue multiplexer. There is a standard Multiplexer or Switches analogue multiplexer here. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. To supply the switch device, a voltage of 4.5V must be applied.
DG509ADY-T Features
4 Channels
Switch Circuit: SP4T
DG509ADY-T Applications
There are a lot of Maxim Integrated DG509ADY-T Analog Switches & Multiplexers ICs applications.
- Transmit
- RGB switches
- Residential Gateways, Home Gateway/Router
- Medical systems
- Audio signal routing
- Intelligent PBX
- Low-Voltage
- Avionics
- New designs requiring multiplexer functions
- Public switching systems