DG412LEDQ-GE3
| Parameters | |
|---|---|
| Factory Lead Time | 20 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2016 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 26Ohm |
| Terminal Finish | Pure Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±3V~8V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 26Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 6pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 50ns, 30ns |
| Charge Injection | 6.6pC |
| Crosstalk | -114dB @ 1MHz |
| Switch-on Time-Max | 60ns |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
DG412LEDQ-GE3 Overview
Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Increasing operating temperature to around -40°C~85°C TA. In total, there have been 16 terminations. This electronic part offers high-quality output due to its 1 channels. With a 5V voltage supply, the electrical component should be turned on and run. SPST - NO switching circuits are used in these analog switch ics. Circuits number 4 make up this analogue multiplexer. As far as internal resistance is concerned, it has 26Ohm. To find out what the 16 pins do, please refer to the datasheets.
DG412LEDQ-GE3 Features
1 Channels
Switch Circuit: SPST - NO
DG412LEDQ-GE3 Applications
There are a lot of Vishay Siliconix DG412LEDQ-GE3 Analog Switches & Multiplexers ICs applications.
- Audio and video signal routing
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Ultrasound
- PBXs
- Sample hold systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Digital Cross-Connects
- Audio and video switching
- Digital access cross connects
- Video switching