DG406EUI
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | DG406 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Qualification Status | Not Qualified |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 69 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 130pF |
| On-state Resistance Match-Nom | 1.5Ohm |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.5 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 200ns |
| Signal Current-Max | 0.03A |
| Length | 9.7mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
DG406EUI Overview
Shipping overseas is convenient with the electronic component packed in 28-TSSOP (0.173, 4.40mm Width). The advanced packaging method Tube provides high reliability. This analog switch is mounted in Surface Mount. 16:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, 28 terminations have occurred. The electronic part provides high-quality output because it has 16 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. Into the electrical component body are injected 28 pins. It consists of 1 circuits. Try searching for DG406 variants of the analog switch ic. In this analog multiplexer, the value is Multiplexer or Switches. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board.
DG406EUI Features
16 Channels
DG406EUI Applications
There are a lot of Maxim Integrated DG406EUI Analog Switches & Multiplexers ICs applications.
- SDH
- New designs requiring multiplexer functions
- HDTV
- E1 Network Equipment
- Cable PC
- Fault Tolerant Systems
- Voice over IP/DSL – Integrated Access Devices, Smart
- Precision test equipment
- DSUs
- Low-Voltage