DG2749DN-T1-E4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFQFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 600mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 190mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DG2749 |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 3V |
| Number of Channels | 1 |
| Max Supply Voltage | 4.3V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1μA |
| Power Dissipation | 190mW |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 25 ns |
| Number of Inputs | 2 |
| Supply Type | Single |
| Turn-Off Delay Time | 25 ns |
| -3db Bandwidth | 93MHz |
| On-State Resistance (Max) | 600mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 52 dB |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 75pF 55pF |
| On-state Resistance Match-Nom | 0.03Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 25ns, 25ns |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 30m Ω (Max) |
| Crosstalk | -90dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.6V~4.3V |
| Height | 550μm |
| Length | 1.4mm |
| Width | 1.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
DG2749DN-T1-E4 Overview
Shipping overseas is convenient due to the electrical component's packing in 8-UFQFN. High reliability is provided by advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Operating temperature extended to -40°C~85°C TA. There are 8 terminations totally. By its 1 channels, the electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. 8 pins are injected to the electronic part body. Unlike digital switches, these are based on SPST - NO/NC switching circuits. Try searching for the analog switch ic with DG2749 if you are looking for variants. As far as internal resistance is concerned, it has 600mOhm. The functions of 8 pins can be found in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Users should never supply a voltage higher than 4.3V to a switch device. Digital switch that provides Single power at a cost-effective price. The lowest voltage the electronic part should receive is 1.6V. This multiplexer would work with 1μA current. This analogue multiplexer requires a voltage of 1.6V~4.3V when it drains from a single voltage supply. When the digital multiplexer is charged above 1μA, damage can occur. There are SEPARATE OUTPUT outputs on this analog switch ic. Operating 2 inputs is required.
DG2749DN-T1-E4 Features
1 Channels
Switch Circuit: SPST - NO/NC
1μA Supply Current
-3db Bandwidth: 93MHz
DG2749DN-T1-E4 Applications
There are a lot of Vishay Siliconix DG2749DN-T1-E4 Analog Switches & Multiplexers ICs applications.
- High-Voltage
- Modems
- Battery-powered systems
- Precision instrumentation
- PCMCIA cards
- PDH Multiplexers
- E1 Network Equipment
- Video switching
- Battery Powered Systems
- Microwave transmission systems