DG2011DXA-T1-E3
| Parameters | |
|---|---|
| Factory Lead Time | 14 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-563, SOT-666 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 2.7Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 172mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DG2011 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 10nA |
| Nominal Supply Current | 10nA |
| Power Dissipation | 172mW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 75 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Turn-Off Delay Time | 59 ns |
| On-State Resistance (Max) | 2.7Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 29pF |
| On-state Resistance Match-Nom | 0.2Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 75ns, 59ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω (Max) |
| Crosstalk | -69dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Drain to Source Resistance | 1.8Ohm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DG2011DXA-T1-E3 Overview
The electronic part can be shipped overseas conveniently because it is packaged in SOT-563, SOT-666. The advanced packaging method Tape & Reel (TR) provides high reliability. This analog switch is mounted in Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. A total of 6 terminations have been recorded. As a result of its 1 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. A total of 6 pins are injected into the electrical part body. Multiplexers built on a SPDT switching circuit are built. Try searching with DG2011 if you're looking for variants. There is 2.7Ohm internal resistance in this digital multiplexer. For functions related to 6 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Digital switch that provides Single power at a cost-effective price. There should be 1.8V voltage fed to the electrical part below 1.8V. This digital switch can be operated with a current of 10nA. Draining from a single voltage supply, this analog switch requires a voltage of 1.8V~5.5V. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. A 1 input needs to be operated. Drain to Source resistance is 1.8Ohm. This digital multiplexer has 2 outputs.
DG2011DXA-T1-E3 Features
1 Channels
Switch Circuit: SPDT
10nA Supply Current
Drain-to-Source resistance: 1.8Ohm
DG2011DXA-T1-E3 Applications
There are a lot of Vishay Siliconix DG2011DXA-T1-E3 Analog Switches & Multiplexers ICs applications.
- ATM
- Cable PC
- Audio and video signal routing
- 65 V DACs
- Routers
- PBXs
- Medical Instrumentation
- Cable Modem
- E1 Network Equipment
- Digital access cross connects