DG2005DQ-T1-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Weight | 139.989945mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 2.5Ohm |
| Terminal Finish | MATTE TIN |
| Max Power Dissipation | 320mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DG2005 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 20nA |
| Nominal Supply Current | 20nA |
| Power Dissipation | 320mW |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 28 ns |
| Number of Inputs | 2 |
| Supply Type | Single |
| Turn-Off Delay Time | 22 ns |
| On-State Resistance (Max) | 2.5Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 61 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 51pF |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 28ns, 22ns |
| Charge Injection | 1pC |
| Crosstalk | -67dB @ 1MHz |
| Switch-on Time-Max | 47ns |
| Switch-off Time-Max | 37ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DG2005DQ-T1-E3 Overview
Shipping overseas is convenient due to the electrical component's packing in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 1:1. Extended operating temperature around -40°C~85°C TA. The total number of terminations is 8. As a result of its 1 channels, this electronic component provides high-quality output. Powered by a 2V voltage supply, the electrical part should be switched on and run. Electronic part bodies are injected with 8 pins. Unlike digital switches, these are based on SPST - NO/NC switching circuits. Using the DG2005 search parameter, you can discover variants of the switch. The internal resistance of this digital multiplexer is 2.5Ohm. For functions related to 8 pins, please refer to the datasheets. Users shouldn't supply more than 5.5V voltage to the switch device. Digital switch that provides Single power at a cost-effective price. 1.8V is the lowest voltage the electrical component should receive. In order to operate this switch device, it would need a current of 20nA. Draining from a single voltage supply, this analog switch requires a voltage of 1.8V~5.5V. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. Operating 2 inputs is required.
DG2005DQ-T1-E3 Features
1 Channels
Switch Circuit: SPST - NO/NC
20nA Supply Current
DG2005DQ-T1-E3 Applications
There are a lot of Vishay Siliconix DG2005DQ-T1-E3 Analog Switches & Multiplexers ICs applications.
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Remote Powered Equipment
- Signal routing between systems
- Imaging
- ATM
- Medical
- PDH Multiplexers
- Fault Tolerant Systems
- Modems
- Fiber In The Loop (FITL)